Future-automation EAD Bedienungsanleitung

1 IR Remote ControlFUNCTIONSUITABILITYSheet 1 of 8ISSUE: 003www.futureautomation.co.ukFUTUREAUTOMATIONEAD Electric Advance & DropSPECIFYINGCONTRO

The EAD must be completely vertical.Make sure with the use of a spirit level that the wall behind is vertical. If it is not, you will have to use was

Make sure the mechanismCANNOT stay in this positionwithout motor power or assistance.Sheet 3 of 8ISSUE: 003www.futureautomation.co.ukFUTUREAUTOMATION

BTOP BUTTON: IN STOPBOTTOM DOWN: OUT STOPDETAIL B Any queries, pleasecontact Jack or Tonyat Future Automation01438 833577IN SWITCHOUT SWITCHDO NOT R

ARemove this screw to release the lidConnect the IEC Power Lead HereIt is VERY important that when all of theelectrical connections are made, theconne

18pinsThere are a number of LEDs which will light up when thecorresponding contact closure connections are shorted together.A red LED will light up wh

912345678Use an RJ11 connector in the socket marked RS232 on the control box to operate using RS232. DETAILSBand rate: 9600Stop bit: 1Parity:

AC2Gives an output of 240V(or 110V) to control the Electric Tilt motor.Outputs stay live for 60 seconds afterthe OUT or IN functions are selected.EMER